WARNING: These boards are not designed to be cutting boards. Meaning, you should not be doing any heavy chopping on them since there is epoxy resin present. If you must cut on your board use the solid wood areas to prevent the chipping of the epoxy/
CARE: Please hand-wash only with a non abrasive towel and warm mildly soapy water. Alternatively, your board can also be cleaned with Walrus Oil board wash. Avoid harmful bleaches, ammonia, silicone or citrus based cleaners, and other harsh chemicals. We recommend occasional wipe downs with butcher block/mineral oil or Walrus Oil to prolong the life of your board.
-Do not submerge in water (This will ruin your Board)
-Do not put into microwave
-Clean/disinfect with a damp rag
-Wipe off excess water with clean cloth
-Allow to air dry